PSR-E463/PSR-E
W
410 O
w
ner’s Man
u
al
45
Qui
c
k Gui
d
e
Connecting to Other De
v
ices
Connectin
g
Headphones
Connect a pair of headphones to the [PHONES/
OUTPUT]/[PHONES] jack on the rear panel.
The
bu
ilt-in speakers are a
u
tomatically sh
u
t off
w
hen
a pl
u
g is inserted into this jack.
Connectin
g
an External Device
•
PSR-E463
: This jack also f
u
nctions as an external
o
u
tp
u
t. By connecting to a comp
u
ter, key
b
oard
amplifier, recorder, or other a
u
dio de
v
ice, yo
u
can
o
u
tp
u
t the a
u
dio signal of this instr
u
ment to that
external de
v
ice. The speakers of this instr
u
ment
are a
u
tomatically sh
u
t off
w
hen a pl
u
g is inserted
into this jack.
•
PSR-EW410
:
W
hen connecting an external
speaker, refer to page 48.
Yo
u
can prod
u
ce a nat
u
ral s
u
stain as yo
u
play
b
y
pressing a foots
w
itch (FC5 or FC4A; sold separately)
pl
u
gged into the [SUSTAIN] jack.
• Before connecting the instrument to external devices, turn off the power of all the devices. Also, before turning the power on or
off, make sure to set all volume levels to minimum. Otherwise, damage to the devices or electrical shock may occur.
CAUTION
Connecting Headphones or an
External Device
• Do not use the headphones for a long period of time at a
high or uncomfortable volume level, since this can cause
permanent hearing loss.
• To avoid possible damage to the external device, first turn
on the power to the instrument, then to the external
device. When turning off the power, do so in reverse order:
first turn off the power to the external device, then to the
instrument.
Standard stereo
phone pl
u
g
CAUTION
NOTICE
Using a Pedal (Sustain)
• Plug or unplug the footswitch while the power is off. Also, do
not press the footswitch when turning the power on. Doing so
changes the polarity of the footswitch, resulting in reversed
operation.
• The sustain function does not affect Split Voices (page 21).
• Some Voices may sound continuously or have a long decay
after the notes have been released while the footswitch is
held.
NOTE
