Yamaha PortaTone PSR-7000 Owner'S Manual Download Page 99

Page: 99 / 174

Custom Voice Edit

The Drum Kit Edit Mode

When a drum kit voice is selected for editing the

parameters and functions available are essentially
the same as those for the orchestra voices in the

FULL EDIT

mode. Many parameters of individual

percussion voices within the DRUM KIT can be
edited independently.

The only differences are in the

E1:BASIC

dis-

play:

●

Use the

PERCUSSION

parameter function to

select the desired percussion sound for editing.
Pressing any key on the keyboard will directly
select that keys percussion sound.

●

The drum kit voices have no

VOLUME

KEY

ON DELAY

parameters.

●

The

PITCH

parameter functions in the same way

as the

TUNE FINE

parameter provided for the

orchestra voices.

The

E2:CONTROLLER

E3:ENVELOPE

E4:EFFECTS

, and

STORE/CLEAR

display param-

eters and functions are the same as in the orchestra
voice

FULL EDIT

mode.

NOTES

• Some parameters may not effect the drum kit voices in

exactly the same way as the orchestra voices.

• Some settings may result in no sound, depending on the

drum kit voice and parameter.

• The SUSTAIN parameter cannot be changed in the E3

setting.

Summary of Contents for PortaTone PSR-7000















































































































































































Search results

Summary of Contents for PortaTone PSR-7000

Reviews:

Related manuals for PortaTone PSR-7000

Brands by name

Popular brands

Yamaha PortaTone PSR-7000, Owner'S Manual

Search results

Summary of Contents for PortaTone PSR-7000

Reviews:

Related manuals for PortaTone PSR-7000

Brands by name

Popular brands