manualshive.com logo in svg

Yamaha PortaTone PSR-7000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-7000 Owner'S Manual Download Page 61

57

Song Playback & Recording

QUICK RECORD song

MULTITRACK RECORD song

DOC song

GM song

The number of volume parameters in the 

TRACK

VOLUME

 display will depend on the type of song

being played. If an original song recorded on the
PSR-7000 using the QUICK RECORD mode is
being played, two volume parameters will be avail-
able: 

MANUAL

 and 

ACCOMP.

 If an original song

recorded on the PSR-7000 using the MULTITRACK
RECORD mode or a GM song is being played,
individual parameters for all 16 tracks will be avail-
able: 

TR1

 through 

TR16

. Use the LCD dials to set

the volume of the corresponding tracks. If a Yamaha
DOC song is being played use the 

RHY

, 

BASS

,

ORCH

, 

LEFT

, and 

RIGHT

 LCD dials to set the

volume of the corresponding tracks (see the DOC or
PianoSoft software manual for more details). If a
PianoSoft song is being played use the 

ORCH

,

LEFT

, and 

RIGHT

 LCD dials to set the volume of the

corresponding tracks.

The LCD dials in the 

TRACK  MUTE 

display

allow 

PLAY

, 

MUTE

, or 

SOLO

 to be selected for

each track group. Muted tracks do not play. If a track
is set to SOLO only that track will play.

The track indicators above the volume or mute/

solo parameters indicate which tracks contain data
and which are muted. Tracks which do not contain
data are indicated by a dotted circle outline while
tracks which contain data have a solid outline. Play-
enabled tracks are indicated by a filled circle while
tracks that are muted are indicated by an outline
only.

NOTES

• When GM song is played all tracks appear on the display

as if they contain data, even if they don’t.

Summary of Contents for PortaTone PSR-7000















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands