manualshive.com logo in svg

Yamaha PortaTone PSR-7000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-7000 Owner'S Manual Download Page 159

155

The DSP Effects & Parameters  •  DSP-Effekte und -Parameter  •  Effets et paramètres DSP

2. AM DEPTH

Range: 0 … 127

Sets the depth of amplitude modulation. Higher values produce deeper modulation and therefore a more pronounced
tremolo effect.

3. PM DEPTH

Range: 0 … 127

Sets the depth of pitch modulation. Higher values produce deeper modulation and therefore a more pronounced vibrato
effect.

This is a sophisticated pan program that allows creation of “rotary” pan in addition to straightforward pan effects.

1. LFO DEPTH

Range: 0 … 127

Sets the overall depth of modulation. Higher values produce deeper modulation and therefore a more pronounced pan
sweep.

2. L/R DEPTH

Range: 0 … 127

Sets the “depth” of the pan sweep from left to right and right to left.

3. F/R DEPTH

Range: 0 … 127

This parameter sets the apparent depth of the sweep from front to rear.

4. PAN DIRECTION

Range: L

<>

R, L

>

R, L

<

R, Lturn, Rturn, L/R

Determines the direction in which the sound sweeps across the stereo sound field.

36. Auto Pan

A fully automatic wah effect that can be set to produce a wide range of sounds.

1. LFO FREQUENCY Range: 0 … 127

Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.

2. LFO DEPTH

Range: 0 … 127

Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced effect.

3. CUTOFF FREQUENCY

Range: 0 … 127

Sets the basic frequency around which the wah filter sweep will occur.

4. RESONANCE

Range: 1 … 12

Creates a resonant peak at the frequency determined by the CUTOFF FREQUENCY parameter, above. The higher the
value the higher the peak, and the more the sound at that frequency is emphasized.

37. Auto Wah

In the DelayLCR effect, independent delays are provided for the left and right channels, plus a center delay. The

DelayL,R variation provides independently programmable delays for the left and right channels.

1. L CH DELAY
2. R CH DELAY
3. C CH DELAY

Range: 0.1 … 715 ms

Set the delay time between the direct sound and the first repeat. Independent parameters are provided for the left (“L
CH”), center (“C CH”), and right (“R CH”) channels. Only the L CH  DELAY and R CH DELAY time parameters are avail-
able for the DelayL,R effect.

4. FEEDBACK DELAY (DelayLCR)
3. FEEDBACK DELAY 1 & 4.FEEDBACK DELAY2 (DelayL,R)

Range:  0.1 … 715 ms

Sets the delay time between repeats. The higher the value the longer the delay. In the DelayL,R effect independent feed-
back delay parameters are provided for the left and right channels.

5. FEEDBACK LEVELRange: –63 … 0 … +63

Determines the amount of effect-sound feedback returned to the input of the delay stage. Higher values produce a greater
number of repeats.

38. DelayLCR

39. DelayL,R

Summary of Contents for PortaTone PSR-7000















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands