Effects Parameters
328
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Reference section
❏
DUAL PITCH
Two input, two output pitch shifter.
❏
ROTARY
One input, two output rotary speaker simulator.
❏
RING MOD.
Two input, two output ring modulator.
❏
MOD. FILTER
Two input, two output modulation filter.
❏
DISTORTION
One input, two output distortion effect.
❏
AMP SIMULATE
One input, two output guitar amp simulator.
❏
DYNA. FILTER
Two input, two output dynamically controlled filter.
Parameter
Range
Description
PITCH 1
–24 to +24 semitones Channel #1 pitch shift
FINE 1
–50 to +50 cents
Channel #1 pitch shift fine
LEVEL 1
–100 to +100%
Channel #1 level (plus values
for normal phase, minus values
for reverse phase)
PAN 1
L63 to R63
Channel #1 pan
DELAY 1
0.0–1000.0 ms
Channel #1 delay time
FB. G 1
–99 to +99%
Channel #1 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
PITCH 2
–24 to +24 semitones Channel #2 pitch shift
FINE 2
–50 to +50 cents
Channel #2 pitch shift fine
LEVEL 2
–100 to +100%
Channel #2 level (plus values
for normal phase, minus values
for reverse phase)
PAN 2
L63 to R63
Channel #2 pan
DELAY 2
0.0–1000.0 ms
Channel #2 delay time
FB. G 2
–99 to +99%
Channel #2 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
MODE
1–10
Pitch shift precision
SYNC
OFF/ON
Tempo parameter sync on/off
NOTE 1
*1
*1.
(Maximum value depends on the tempo setting)
Used in conjunction with
TEMPO to determine Channel
#1 delay
NOTE 2
1
Used in conjunction with
TEMPO to determine Channel
#2 delay
Parameter
Range
Description
ROTATE
STOP, START
Rotation stop, start
SPEED
SLOW, FAST
Rotation speed (see SLOW and
FAST parameters)
SLOW
0.05–10.00 Hz
SLOW rotation speed
FAST
0.05–10.00 Hz
FAST rotation speed
DRIVE
0–100
Overdrive level
ACCEL
0–10
Acceleration at speed changes
LOW
0–100
Low-frequency filter
HIGH
0–100
High-frequency filter
Parameter
Range
Description
SOURCE
OSC, SELF
Modulation source: oscillator or
input signal
OSC FREQ
0.0–5000.0 Hz
Oscillator frequency
FM FREQ.
0.05–40.00 Hz
Oscillator frequency modulation
speed
FM DEPTH
0–100%
Oscillator frequency modulation
depth
SYNC
OFF/ON
Tempo parameter sync on/off
NOTE FM
*1
*1.
Used in conjunction with TEMPO
to determine FM FREQ
Parameter
Range
Description
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
PHASE
0.00–354.38 degrees
Left-channel modulation and
right-channel modulation
phase difference
TYPE
LPF, HPF, BPF
Filter type: low pass, high pass,
band pass
OFFSET
0–100
Filter frequency offset
RESO.
0–20
Filter resonance
LEVEL
0–100
Output level
SYNC
OFF/ON
Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with
TEMPO to determine FREQ
Parameter
Range
Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion,
OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
TONE
–10 to +10
Tone
N. GATE
0–20
Noise reduction
Parameter
Range
Description
AMP TYPE
*1
*1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-
DX, CMB-TW, MINI, FLAT
Guitar amp simulation type
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion,
OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
BASS
0–100
Bass tone control
MIDDLE
0–100
Middle tone control
TREBLE
0–100
High tone control
CAB DEP
0–100%
Speaker cabinet simulation depth
EQ F
100–8.00 kHz
EQ (peaking type) frequency
EQ G
–12.0 to +12.0 dB
EQ (peaking type) gain
EQ Q
10.0–0.10
EQ (peaking type) bandwidth
N. GATE
0–20
Noise reduction
Parameter
Range
Description
SOURCE
INPUT, MIDI
Control source: input signal or
MIDI Note On velocity
SENSE
0–100
Sensitivity
DIR.
UP, DOWN
Upward or downward frequency
change
DECAY
*1
*1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz),
3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s (fs=96 kHz)
Filter frequency change decay
speed
TYPE
LPF, HPF, BPF
Filter type
OFFSET
0–100
Filter frequency offset
RESO.
0–20
Filter resonance
LEVEL
0–100
Output Level
