Input Meter Bridge
29
You can also hold down the top panel [SHIFT]
switch and press the METER section METER
SELECT [MIX 25-48] switch to make the meter
bridge show the input levels of the input channels. In
this case as well, only the METER SELECT [MIX 25-
48] switch will blink, and the above
button will
automatically be turned on.
•
button
(Selectable only if the FIXED CH button is on. Displayed as 25- in Vertical pairing mode.)
When this button is on, the meters will always display the levels of input channels 49–96 (if Vertical pairing mode is
selected, channels 25, 73, 26, 74…48, 96) regardless of the currently selected panel assignment or layer.
Horizontal pairing mode
Vertical pairing mode
At this time, the MIX/MATRIX bus number LED located at the bottom of the meter bridge will go dark. In the
METER section, the METER SELECT [MIX 25-48] switch will go dark, and the [MATRIX 1-24] switch will blink.
You can also hold down the top panel [SHIFT]
switch and press the METER section METER
SELECT [MATRIX 1-24] switch to make the meter
bridge show the input levels of the input channels. In
this case as well, only the METER SELECT [MATRIX
1-24] switch will blink, and the above
button
will automatically be turned on.
SHIFT
+
Input channels 49–72
Input channels 73–96
[Meter bridge]
········
········
········
········
[Meter bridge]
Input channel 25
26
73
74
84
36
37
85
86
38
96
48
SHIFT
+
