background image

MIDI Functions

NP-31/NP-11  MIDI Reference

3

Normally the instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device, 
causing the same numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The instrument 
will normally also send a MIDI program change number whenever one of its voices is selected, causing the same numbered voice or 
program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. 
This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the 
instrument without affecting the external MIDI device.

For information on program change num-
bers for each of the Voices of the instru-
ment, refer to page 4.

Default setting:

 ON

While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button, 
then press one of the B5 key. Pressing the B5 key repeatedly toggles between Program Change On 
and Off.

Normally the instrument will respond to MIDI control change data received from an external MIDI device or keyboard, causing the 
voice on the corresponding channel to be affected by pedal and other “control” settings received from the controlling device (the key-
board voice is not affected). The instrument also transmits MIDI control change information when the pedal or other appropriate con-
trols are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the 
pedal of the instrument and other controls can be operated without affecting an external MIDI device.

For information on control changes that 
can be used with the instrument, refer to 
page 4.

Default setting:

 ON

While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button, 
then press one of the C6 key. Pressing the C6 key repeatedly toggles between Control Change On 
and Off.

Program Change ON/OFF

NOTE

NOTE

B5

NP-11

NP-31

Control Change ON/OFF

NOTE

NOTE

C6

NP-11

NP-31

Summary of Contents for piaggero NP-11








Reviews: