7
PGM1/PGX1 Installation Man
u
al
Introduction
Thank you for purchasing the Yamaha PGM1 paging station microphone or the PGX1
paging station extension. These products are a paging station microphone and an exten-
sion unit used in an installed system for on-premises broadcast. This installation manual
explains installation methods for the installing technician or the designer. Be sure to
read this installation manual before installing the units. After reading this manual, keep
it for future reference.
Features
The PGM1/PGX1 are paging stations that can
b
e
u
sed
w
ith the MTX5-D or MRX7-D. They pro-
v
ide the follo
w
ing feat
u
res.
• Paging stations can
b
e net
w
orked
v
ia a Dante net
w
ork and PoE (Po
w
er o
v
er Ethernet).
• Chimes and messages can
b
e played
b
ack
u
sing an SD card player.
• T
w
o PGX1
u
nits can
b
e added for each PGM1
u
nit, allo
w
ing yo
u
to specify
b
roadcast
regions in detail and to select from n
u
mero
u
s messages.
• Yo
u
can
u
se MTX-MRX Editor to install
u
p to fo
u
r PGM1
u
nits in one MTX/MRX system. One
of these PGM1
u
nits can
b
e specified as the priority mic.
What you’ll need to provide
• PoE injector or PoE network switch that supports IEEE802.3af
This is
u
sed
b
et
w
een the MTX/MRX system and the PGM1 in order to s
u
pply po
w
er to the
PGM1 and the PGX1.
PoE injector
u
nits and PoE net
w
ork s
w
itches are collecti
v
ely referred to as “PSE (Po
w
er
So
u
rcing Eq
u
ipment).”
• Ethernet cables (CAT5e or better)
These are
u
sed
b
et
w
een the MTX/MRX system and the PSE, and
b
et
w
een the PSE and the
PGM1.
• Phillips screwdriver
This is
u
sed
w
hen connecting a PGX1.
