16 PGM1/PGX1 Installation Man
u
al
Connecting a PGX1
Up to t
w
o PGX1
u
nits can
b
e connected to one PGM1
u
nit.
1.
Turn the PGM1 and PGX1 units over on their back.
2.
Place the PGM1 on the ri
g
ht, and place the PGX1 to be connected on the left.
3.
Remove the rubber cap from the bottom panel of the PGM1.
4.
Use the included connection cable to connect the PGM1 and PGX1.
5.
Place the connectin
g
bracket between the two units, and fasten the screws (at the 8
locations shown below) on the PGX1 side to secure it.
6.
Place the rubber cap that you removed from PGM1 into the socket of the unused
dedicated 8-pin connector of the PGX1.
If yo
u
w
ant to connect a second PGX1
u
nit, yo
u
can do so in a similar
w
ay.
NOTICE
• Before makin
g
connections, detach the Ethernet cable and
g
ooseneck mic.
• Make sure to place a soft cloth underneath the device so that the surface of the body will not be
dama
g
ed.
PGX1
PGM1
Connecting
b
racket
Connecting
b
racket
PGX1
PGM1
