Connecting the PGM1 to an MTX/MRX system
15
PGM1/PGX1 Installation Man
u
al
1.
Use the rotary switch and DIP switches of each unit to specify its UNIT ID.
2.
Connect a PoE network switch that can work with Dante within the Dante network,
and use an Ethernet cable to connect the PGM1 to the network switch. If the network
switch does not support PoE, connect a PoE injector between the network switch
and the PGM1.
In some cases, the PSE (PoE net
w
ork s
w
itch or PoE injector) might ha
v
e ports that s
u
pply
po
w
er and ports that do not s
u
pply po
w
er. Connect the PGM1 to a port that s
u
pplies
po
w
er. For details on ho
w
to synchronize each de
v
ice, refer to “MTX-MRX Editor User
G
u
ide.”
3.
With the PGM1 and the PSE connected, power-on the PSE.
Connections for a small system
Connections for a lar
g
e system
Comp
u
ter
MRX7-D
PoE injector
PGM1
Maxim
u
m 100 meters
MRX7-D
PGM1
XM
V8
2
8
0-D
PGM1
PGM1
PGM1
Maxim
u
m
100 meters
SWR2100P-10G
SWP1-16MMF
Comp
u
ter
