Yamaha PC406-D Owner'S Manual Download Page 63

Page: 63 / 101

10.6. CLOCK

①

DATE

This shows and sets the date of the internal clock.

②

TIME

This shows and sets the time of the internal clock.

NOTE

• You can use Provisionaire Amp Editor to apply the computer’s time to this unit. For details, refer to

the Provisionaire Amp Editor setup guide.

10.7. INITIALIZE

This shows in the display how to initialize data within the amp.

NOTE

For details on the initialization method, refer to "

Returning to the factory settings (Initialization)

10.8. REBOOT

If you have modified multiple settings that require a reboot, use this to reboot once for all of these changes.
A message like the following appears in the screen.

・

To reboot: Turn the main knob to select YES, and then press to confirm.

・

To cancel: Turn the main knob to select NO, and then press to confirm.

10. UTILITY screen

| PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual

Summary of Contents for PC406-D






































































































Search results

Summary of Contents for PC406-D

Reviews:

Related manuals for PC406-D

Brands by name

Popular brands

Yamaha PC406-D, Owner'S Manual

Search results

Summary of Contents for PC406-D

Reviews:

Related manuals for PC406-D

Brands by name

Popular brands