9. NETWORK screen
Here you can make settings for network audio (Dante) and remote control, and view the status of the network.
9.1. DEVICE
①
UNIT ID
This specifies the ID that individually distinguishes PC-D/DI series units on the Dante network.
The specified UNIT ID is applied after this unit is restarted. If more than one unit of the same model exists in the
same network, ensure that the ID does not conflict.
NOTE
• The range of this setting is 01–FE (hexadecimal).
Turn the main knob to select the character that you want to input, and then press the main knob to confirm the
character. In the restart confirmation screen, select YES. The setting is applied after the restart.
The specified UNIT ID is shown in the HOME screen.
②
NAME
This specifies the device name of this unit. If you assign an easily-recognizable device name, it will be easier to
distinguish it in Provisionaire Amp Editor.
NOTE
• A name of up to 32 characters can be entered.
• The following characters can be entered.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!"#$%&'()*+,-./:;<
⇒
?@[\]^_`{|}
• Characters other than the above that were assigned in Provisionaire Amp Editor are displayed as "?".
9. NETWORK screen
52
| PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual
