Yamaha PC406-D Owner'S Manual Download Page 91

Page: 91 / 101

PC412-D

PC406-D

PC412-DI

PC406-DI

Power
consumption

1/8 MAX power,
2 Ω, pink noise at
all channels

1850 W

1050 W

1850 W

1100 W

idle

190 W

165 W

190 W

Standby

120 V/ 9 W

230 V/ 12 W

Operating temperature

0 degrees to +40 degrees

Storage temperature

-20 degrees to +60 degrees

Dimensions (W

480

528 mm

Weight (with grill and handles)

16.0 kg

15.6 kg

16.0 kg

15.9 kg

*1 The unit has been verified to operate through a ±10% voltage variance from the rated power supply voltage.
*2

WARNING

Use only the supplied power cord.

NOTICE

• When measuring the amplifier output, use a measuring device that supports balance input.

• Incorrect connection will fail to provide a proper ground connection, causing the amplifier or the

measuring device to malfunction.

The explanations in this document use the latest specifications as of the date of publication. The latest version
can be downloaded from the Yamaha website.

13. Reference

| PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual

Summary of Contents for PC406-D






































































































Search results

Summary of Contents for PC406-D

Reviews:

Related manuals for PC406-D

Brands by name

Popular brands

Yamaha PC406-D, Owner'S Manual

Search results

Summary of Contents for PC406-D

Reviews:

Related manuals for PC406-D

Brands by name

Popular brands