Yamaha NS-WSW121 Owner'S Manual Download

Page: 59 / 67

APPENDIX

➤

Troubleshooting

Transmitting

Problem

Cause

Remedy

Cannot make the unit connected to the

Bluetooth

device.

“Bluetooth” is set to “Off”.

Set it to “On” (p. 46).

“Transmission” is set to “Off”.

Set it to “On” (p. 46).

Another

Bluetooth

device is connected.

Terminate the current

Bluetooth

connection, and connect to the device to

which audio should be transmitted (p. 25).

The device does not support A2DP.

Connect to a

Bluetooth

audio device that supports A2DP.

The unit and device are too far apart.

Position the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit

and connect the device to this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

No sound is heard or the sound is
intermittent via the

Bluetooth

device.

The device is not set to receive

Bluetooth

audio signals from the unit.

Check that the

Bluetooth

function of the device is set properly.

The device’s volume is set to minimum.

Turn up the volume level on the device.

The sound to be transmitted is not playing.

Play sound on the device selected with the input key (p. 25).

The unit and device are too far apart.

Move the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

The

Bluetooth

connection of the unit with the device is disconnected.

Perform

Bluetooth

connection operations again (p. 25).

Attempted to establish a connection during playback with AirPlay.

Playback with AirPlay cannot be transmitted. Terminate AirPlay playback and
try again to establish a connection (p. 41).

Summary of Contents for NS-WSW121




































































Search results

Summary of Contents for NS-WSW121

Reviews:

Related manuals for NS-WSW121

Brands by name

Popular brands

Yamaha NS-WSW121, Owner'S Manual

Search results

Summary of Contents for NS-WSW121

Reviews:

Related manuals for NS-WSW121

Brands by name

Popular brands