Yamaha NS-WSW120 Owner'S Manual Download

Page: 78 / 83

APPENDIX

➤

Specifications

YSP-CU2500

Amplifier section

• Rated Output Power

Tweeter (1 kHz, 1% THD, 4

) ...................................... 27.2 W

• Maximum Effective Output Power

Tweeter (1 kHz, 10% THD, 4

) ....................................... 32 W

Speaker section

• Speaker Type...Acoustic Suspension/Magnetic Shielding type

• Driver

Tweeter ......................................... 2.8 cm (1-1/8 in) Cone × 16

• Impedance ..........................................................................4

Input jack

• Audio Input

Optical ........................................................... 2 (TV, OPTICAL)

Coaxial........................................................................ 1 (AUX2)

Analog .................................................................1 pair (AUX1)

• HDMI Input .................................................. 3 (HDMI IN 1 to 3)

Output jack

• HDMI Output (ARC).................................................................1

• Headphones ............................................................................1

• Subwoofer Output....................................................................1

Other jack

• INTELLIBEAM MIC ..................................................................1

• SYSTEM CONNECTOR ...........................................................1

Bluetooth

•

Bluetooth

version................................................ Ver. 2.1 +EDR

• Supported protocols ............................................... A2DP, SPP

• Supported codecs ................................................... SBC, aptX

• Wireless output..............................................

Bluetooth

Class 2

• Maximum communication distance ....................... 10 m (33 ft)

(without interference)

• Protection of supported content..................... SCMS-T scheme

General

• Power Supply

[U.S.A. and Canada models] ..........................AC 120 V, 60 Hz

[Taiwan model] ................................... AC 110–120 V, 50/60 Hz

[China model]..................................................AC 220 V, 50 Hz

[Other models] ................................... AC 220–240 V, 50/60 Hz

• Power Consumption ..........................................................24 W

• Standby Power Consumption

HDMI CONTROL ON and

Bluetooth

Standby ON .................................... Less than 1.2 W

HDMI CONTROL OFF and

Bluetooth

Standby ON .................................... Less than 0.5 W

HDMI CONTROL OFF and

Bluetooth

Standby OFF .................................. .Less than 0.4 W

• Dimensions (W × H × D)

When the legs are adjusted to a minimum height

........................944 × 73 × 144 mm (37-1/8 × 2-7/8 × 5-5/8 in)

• Weight ...............................................................4.0 kg (8.8 lbs)

NS-WSW120

• Driver...........................................10 cm (4 in) cone woofer × 2

non-magnetic shielding type

• INPUT jack .............................................................................. 1

• SYSTEM CONNECTOR jack ................................................... 1

• Output power ...........................75 W (100 Hz, 5

, 10% T.H.D)

• Dynamic power ............................................................... 130 W

• Frequency response ...........................................40 Hz–500 Hz

• Wireless

Frequency .................................................................... 2.4 GHz

Transmission Range................................................10 m (33 ft)

(without interference)

• Power supply

[U.S.A. and Canada models].......................... AC 120 V, 60 Hz

[Taiwan model]........................................ AC 110–120 V, 60 Hz

[Australia model]............................................ AC 240 V, 50 Hz

[U.K. and Europe models] .............................. AC 230 V, 50 Hz

[China model] ................................................. AC 220 V, 50 Hz

[Korea model] ................................................. AC 220 V, 60 Hz

[Asia model]...................................... AC 220–240 V, 50/60 Hz

• Power consumption .......................................................... 75 W

• Standby Power Consumption

Wireless............................................................................ 1.6 W

Wired................................................................................ 1.5 W

• Dimensions (W x H x D)

Upright positioning

.................... 147 × 444 × 353 mm (5-3/4 × 17-1/2 × 13-7/8 in)

Positioned on side

.................... 434 × 129 × 353 mm (17-1/8 × 5-1/8 × 13-7/8 in)

• Weight ............................................................. 7.9 kg (17.4 lbs)

YSP- NS-WSW120

• Frequency Response........................ 40 Hz to 22 kHz (-10 dB)

• Crossover frequency......................................................500 Hz

Specifications are subject to change without notice.

Specifications

Summary of Contents for NS-WSW120




















































































Search results

Summary of Contents for NS-WSW120

Reviews:

Related manuals for NS-WSW120

Brands by name

Popular brands

Yamaha NS-WSW120, Owner'S Manual

Search results

Summary of Contents for NS-WSW120

Reviews:

Related manuals for NS-WSW120

Brands by name

Popular brands