5
En
The speaker and the grille are packed separately. To attach
the grille, line up the four salients (magnet) on the reverse side
of the grille with the four corresponding pegs.
• When the grille is not attached, take care not to touch
the speaker units with your hands or to exert excessive
force with tools.
• There are magnets on the reverse side of the grille. Do
not place the grille close to objects that might be
affected by magnets, such as TVs, clocks, magnetic
cards, diskettes etc. when you don’t attach it.
The port on the back of this unit has a port plug to adjust the
bass level. When you want to increase the bass level, detach
the port plug.
Type .................................. 2-way bass reflex speaker system
non magnetic shielding type
Driver............................................ 16 cm (6-1/2”) cone woofer
3 cm (1”) aluminum dome tweeter
Impedance ........................................................................ 6
Ω
Frequency response ......................45 Hz to 50 kHz (
–
10 dB)
to 100 kHz (
–
30 dB)
Nominal input power ....................................................... 30 W
Maximum input power ................................................... 120 W
Sensitivity ....................................................... 88 dB/2.83 V/m
Crossover frequency ...................................................... 3 kHz
Dimensions (W x H x D) ..........................220 x 380 x 353 mm
(8-5/8” x 15” x 13-7/8”)
Weight .......................................................... 9.6 kg (21.2 lbs.)
• Specifications are subject to change without notice due
to product improvements.
• Care should be taken not to exceed the input power
values noted above.
• A speaker cable is not included with this model.
ATTACHING THE GRILLE
Notes
ABOUT THE PORT PLUG
Hz
dB
50
200
300
Port plug
Rear side
without port plug
with port plug
Bass range characteristics:
Port
SPECIFICATIONS
