2
En
Eng
lish
The grille is detached from the speaker and packed
separately. Be careful not to lose it.
Place the speakers on a sturdy, vibration-free surface, or on a
well-built stand.
■
Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are
slightly angled in towards the listeners.
■
Using as front speakers in a multi
channel system
Position the speakers on both sides of the TV. The positioning
of speakers is important, because it controls the whole sound
quality of a multi channel system. Set up the speakers on the
basis of your listening position by following the owner’s
manual supplied with your amplifier.
Placing the speakers too close to a CRT-type TV may
impair the picture color or cause a buzzing noise. In this
case, move the speakers at least 20 cm (8") away from the
TV. This is not an issue with LCD and plasma TVs.
PLACING THE SPEAKERS
Speaker layout image
Note
NS-B951
Surround
Subwoofer
Center
Yamaha speaker stand SPS-900 (option)
You can use this unit as a floor stand speaker when
installing on an SPS-900.
In this case, use screw holes on the bottom of this unit.
• For details about installing, refer to the assembly
instruction of SPS-900.
• To avoid accidents resulting from tripping over loose
speaker cables, fix them to the floor.
• Do not fasten the speaker on the stand with nails or
adhesives, etc. Long time use and vibrations may
cause this unit to fall down.
• Do not pinch the cables between the speaker and the
stand.
Notes
Yamaha speaker
stand SPS-900
Screw holes
Diameter: 4 mm (1/8”)
Hole depth: 13 mm (1/2”)
Bottom view
(Front side)
135 mm (5-3/8”)
