Instrument an
d
control functions
4-13
4
When the last segment of the fuel me-
ter starts flashing, the display changes
to the fuel reserve tripmeter “TRIP F”
and starts counting the distance trav-
eled from that point. In this case,
push “
” to change the display in the
following order.
TRIP F
→
km/L, L/100 km, or MPG
→
AVE – –.– km/L, AVE – –.– L/100 km, or
AVE – –.– MPG
→
°F (coolant)
→
°F Air
→
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
TIP
Push “
” to change the display
in the opposite order.
To reset a tripmeter, push the
“RESET” button for one second.
The fuel reserve tripmeter can be
reset manually, or you can allow it
to reset automatically after refuel-
ing and traveling about 5 km (3
mi).
Instantaneous fuel consumption
Instantaneous fuel consumption can
be set to “km/L”, “L/100 km”, or
“MPG”.
“km/L”: the distance that can be
traveled on 1.0 L of fuel
“L/100 km”: the amount of fuel
necessary to travel 100 km
“MPG”: the distance that can be
traveled on 1.0 US gal of fuel
TIP
To switch between “km/L”, “L/100
km”, and “MPG”, push the “RE-
SET” button for one second.
When traveling under 10 km/h (6
mi/h), “– –.–” is displayed.
Avera
g
e fuel consumption
Average fuel consumption can be set
to either “AVE – –.– km/L”, “AVE – –.–
L/100 km”, or “AVE – –.– MPG”.
“AVE – –.– km/L”: the average dis-
tance that can be traveled on 1.0 L
of fuel
“AVE – –.– L/100 km”: the average
amount of fuel necessary to travel
100 km
“AVE – –.– MPG”: the average dis-
tance that can be traveled on 1.0
US gal of fuel
TIP
To reset the average fuel con-
sumption, push the “RESET” but-
ton for one second.
1. Instantaneous fuel consumption display
1
1. Average fuel consumption display
1
UBD510E0.book Page 13 Tuesday, July 17, 2018 1:55 PM
