Perio
d
ic maintenance an
d
a
d
justment
7-33
7
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a hi
g
her ampera
g
e
ratin
g
than recommen
d
e
d
to
avoi
d
causin
g
extensive
d
am-
a
g
e to the electrical system an
d
possi
b
ly a fire.
[EWA15132]
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1. Signaling system fuse
2. ABS control unit fuse
3. Accessory fuse
4. Ignition fuse
5. Hazard fuse
6. Terminal fuse 1
7. Terminal fuse 2
8. Headlight fuse
9. Right radiator fan motor fuse
10.Left radiator fan motor fuse
11.Spare fuse
11
1 2
3
11
10 9 8 7 6 5
4
Specifie
d
fuses:
Main fuse:
50.0 A
ABS motor fuse:
30.0 A
Cruise control fuse:
1.0 A
Brake light fuse:
1.0 A
Specifie
d
fuses (fuse
b
ox 1):
Fuel injection system fuse:
25.0 A
ABS solenoid fuse:
20.0 A
Electronic throttle valve fuse:
7.5 A
Backup fuse:
7.5 A
Heater fuse:
10.0 A
Specifie
d
fuses (fuse
b
ox 2):
Signaling system fuse:
7.5 A
ABS control unit fuse:
5.0 A
Accessory fuse:
5.0 A
Ignition fuse:
15.0 A
Specifie
d
fuses (fuse
b
ox 3):
Hazard fuse:
7.5 A
Terminal fuse 1:
2.0 A
Terminal fuse 2:
2.0 A
Radiator fan motor fuse:
10.0 A
×
2
Headlight fuse:
10.0 A
UBD510E0.book Page 33 Tuesday, July 17, 2018 1:55 PM
