Instrument an
d
control functions
4-15
4
To adjust the display brightness
1. Turn the key to “OFF”.
2. Push and hold the “MENU”
switch.
3. Turn the key to “ON”, and then re-
lease the “MENU” switch after five
seconds.
4. Push the “SELECT” switch up or
down to select the desired bright-
ness level.
5. Push the “MENU” switch to con-
firm the selected brightness level.
The control mode changes to the
shift light on / flash / off setting
function.
To set the shift light on / flash / off
1. Push the “SELECT” switch up or
down to select one of the follow-
ing style settings:
On setting: the shift light will
come on when the set engine
speed is reached. This setting
is selected when the indicator
light is lit continuously.
Flash setting: the shift light
will flash when the set engine
speed is reached. This setting
is selected when the indicator
light flashes four times per se-
cond.
Off setting: the shift light is
deactivated. This setting is
selected when the indicator
light flashes once every two
seconds.
2. Push the “MENU” switch to con-
firm the selection. The control
mode changes to the shift light on
r/min setting function.
To set the shift light on r/min
The shift light can be set between 6000
r/min and 12000 r/min in increments of
200 r/min.
1. Push the “SELECT” switch up or
down to select the desired engine
speed for activating the indicator
light.
2. Push the “MENU” switch to con-
firm the selected engine speed.
The control mode changes to the
shift light off r/min setting function.
To set the shift light off r/min
The shift light can be set between 6000
r/min and 12000 r/min in increments of
200 r/min. Be sure to set the off r/min
to a higher engine speed than the on
r/min setting, otherwise the shift light
will not come on.
1. Push the “SELECT” switch up or
down to select the desired engine
speed for deactivating the indica-
tor light.
2. Push the “MENU” switch to con-
firm the selected engine speed.
The control mode changes to the
shift light brightness setting func-
tion.
To adjust the shift light brightness
1. Push the “SELECT” switch up or
down to select the desired shift
light brightness level.
2. Push the “MENU” switch to con-
firm the selected brightness level
and exit the control mode.
UBD510E0.book Page 15 Tuesday, July 17, 2018 1:55 PM
