MENU DESCRIPTION
You can toggle the status of the input which is blinking by depressing the “B”
button
. If the brackets appear around this input, the patch is ON, if it is clear, then the
patch is OFF. You can go from one input to the other by turning the wheel.
Note: Of course several inputs can be patched to one output. Be careful when patching
both analog and digital input together to one channel: It is very unlikely that the two
signals can be in phase. We recommend using this solution only for analog backup of
digital network, meaning that only digital or analog inputs will be used at a time.
Once a channel is patched, you can edit the patch for another channel by depressing the
“A” button (Back) and selecting another channel, or simply by directly pressing the
corresponding “Select” button for another channel (then the name of that channel will
appear on the bottom line of the LCD screen, in front of the channel select button).
Save/recall user setups
User setups contain all the settings of the NXAMP Powered TDcontroller, so you can
consider that a user setup is a snapshot of the amplifier state. To access the Save/recall
menu, go to the “OPTION” menu, and select the sub-menu “3. Save/Recall” (see above).
On the center of the screen will be displayed the various setups with the setups name. On
each side you can select either “Save” or “Recall” function.
To save a user setup select the memory block you want to use (there are 32 different
memory blocks) by turning the wheel till the chosen memory block appears on the top line
of the LCD screen. Then press the “Select 1” button (for “Save”). Anytime you can exit this
menu by depressing the “A” button (for “Back”).
PAGE 48 OF 91
