Instrument and control functions
6-5
1
2
3
4
5
6
7
8
9
10
11
12
13
icon should come on for a few seconds.
Otherwise have a Yamaha dealer
check the CCU and the electrical cir-
cuit.
EAU96494
Switching the display units
The display units can be switched be-
tween kilometers and miles.
To switch the display units:
1. With the select button, display the
odometer.
2. Press and hold the select button
until the currently selected unit
starts flashing.
3. Press the select button once to
switch the display units between
km/h and MPH.
4. Press and hold the select button
until the flashing stops.
EAU96501
Speedometer
The speedometer shows the vehicle’s
traveling speed.
EAU96513
Lithium-ion battery level meters
The lithium-ion battery level meters
show the current charge of the lithi-
um-ion batteries.
If an optional lithium-ion battery is in-
stalled in the vehicle, two battery level
meters are displayed on either side of
the multi-function display.
According to which battery is being
used, the arrow marks “
” will be dis-
played around the battery number.
TIP
For more details on the lithium-ion bat-
tery level meters, see page 4-6.
EAU98211
Information display
The information display contains:
clock
odometer
trip meter
charging status display (shown
when charging)
vehicle status messages
Press the select button to cycle through
display items.
EAU96535
Clock
The clock uses a 12-hour time system.
To set the clock
1. Use the select button to display the
clock.
2. Press and hold the select button
until the hour digits start flashing.
3. Use the select button to set the
hours.
4. Press and hold the select button
until the minute digits start flash-
ing.
5. Use the select button to set the
minutes.
6. Press and hold the select button
until the minute digits stop flash-
ing. The setting is confirmed.
TIP
When the CCU and smartphone are
connected after vehicle power on, the
clock is automatically adjusted.
Odometer
The odometer shows the total distance
traveled by the vehicle.
BFM-F8199-E0.book 5 ページ ２０２２年２月４日 金曜日 午後４時１１分
