ESS025 features
4-2
1
2
3
4
5
6
7
8
9
10
11
12
13
EAU97425
Multiple lithium-ion batteries
Up to 2 lithium-ion batteries can be in-
stalled at a time. The batteries can be
installed in the following two patterns:
If the lithium-ion battery currently
used for driving, switches to limited
output power due to low remaining
charge, the limited output indicator
light will come on. (See page 4-6.)
When this occurs, if the vehicle
stops with the accelerator closed,
e.g. because of waiting at a traffic
light, the vehicle will automatically
switch to using the second lithi-
um-ion battery. In addition, the out-
put limit will be released.
When the remaining charge of the
first lithium-ion battery decreases
to almost 0%, the vehicle will auto-
matically switch to using the sec-
ond lithium-ion battery, even if the
vehicle is driving or has stopped.
The battery charge levels are dis-
played on the multi-function dis-
play as shown.
TIP
Even if some capacity remains in
the first lithium-ion battery, if it is in
the limited output status due to
high or low temperature or if an ab-
normality occurs, the vehicle might
change to using the second lithi-
um-ion battery automatically.
Do not charge two lithium-ion bat-
teries successively. The battery
charger could become hot, and as
a result, it could take more time un-
til the lithium-ion battery is fully
charged or charging could be inter-
rupted mid-way. Therefore, wait
until the battery charger has
1. Lithium-ion battery 1
2. Lithium-ion battery 2
1. Plug cover
1
1
1
2
2
1
1
1
1. Lithium-ion battery level meter 1
2. Lithium-ion battery level meter 2
1
2
BFM-F8199-E0.book 2 ページ ２０２２年２月４日 金曜日 午後４時１１分
