Yamaha Neo's 4 2018 Owner'S Manual Download

Page: 27 / 78

Instrument an

control functions

3-11

EAU13681

Kickstarter

To start the engine, fold out the kick-
starter lever, move it down lightly with
your foot until the gears engage, and
then push it down smoothly but force-
fully.

EAU13933

Seat

To open the seat

1. Place the scooter on the center-

stand.

2. Insert the key into the main switch,

and then turn it counterclockwise
to “OPEN”.

TIP

Do not push inward when turning the
key.

3. Fold the seat up.

To close the seat

1. Fold the seat down, and then push

it down to lock it in place.

2. Remove the key from the main

switch if the scooter will be left un-
attended.

TIP

Make sure that the seat is properly se-
cured before riding.

1. Kickstarter lever

1. Open.

1. Seat open position

U2ACE7E0.book Page 11 Tuesday, October 3, 2017 9:25 AM

Summary of Contents for Neo's 4 2018















































































Search results

Summary of Contents for Neo's 4 2018

Reviews:

Related manuals for Neo's 4 2018

Brands by name

Popular brands

Yamaha Neo's 4 2018, Owner'S Manual

Search results

Summary of Contents for Neo's 4 2018

Reviews:

Related manuals for Neo's 4 2018

Brands by name

Popular brands