Instrument an
d
control functions
3-4
3
TIP
Be sure to turn the key to “
” be-
fore using the “RESET/SELECT”
button.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and miles, when the main
switch is turned to “
”, press the
“RESET/SELECT” button for at
least eight seconds.
To set the clock:
1. Select the odometer and push the
“RESET/SELECT” button for at
least three seconds.
2. When the hour digits start flash-
ing, push the “RESET/SELECT”
button to set the hours.
3. To change the minutes digits,
push the “RESET/SELECT” but-
ton for at least three seconds.
4. When the minutes digits start
flashing, push the “RESET/SE-
LECT” button to set the minutes.
5. Push the “RESET/SELECT” but-
ton for at least three seconds to
start the clock.
TIP
After setting the clock, be sure to push
the “RESET/SELECT” button for at
least three seconds before turning the
key to “
”, otherwise the clock will not
be set.
O
d
ometer an
d
tripmeter mo
d
es
Pushing the “RESET/SELECT” button
switches the display between the
odometer mode “ODO” and the trip-
meter “TRIP” in the following order:
ODO
→
TRIP
→
ODO
If the fuel level warning indicator
comes on (see page 3-2), the odome-
ter display will automatically change to
the fuel reserve tripmeter mode “TRIP
F” and start counting the distance trav-
eled from that point. In that case, push-
ing the “RESET/SELECT” button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
TRIP F
→
ODO
→
TRIP
→
TRIP F
RESET/
SELECT
RESET/
SELECT
U2ACE7E0.book Page 4 Tuesday, October 3, 2017 9:25 AM