28
MW10
*1 Measure with 2TR IN/USB level control set at the MAX position.
*2 Set 2TR IN/USB switch ON (TO C-R) when you measure C-R OUT and PHONES OUT.
3.4
USB
3.4-1 Recording
Record to the personal computer by way of USB in the state in Table 3.4-1. (Refer to 3.1 for other settings.)
3.4-2 Gain
The output levels shall be within the range specified in the Table 3.4-2 when you play back the recorded file by
way of USB.
* Set the [2TR IN/USB] switch to off (TO ST) during playback.
*1 Measure with the 2TR IN/USB level control set at the MAX position.
*2 Don’t input the signal to all other input terminals.
*3 Set the volume control of WINDOWS in MAX.
INPUT
INPUT Level
ST L OUT
ST R OUT
C-R OUT L
*2
C-R OUT R
*2
PHONES L
*2
PHONES R
*2
L
-35.8
-12 +/-2
--
-2 +/-2
--
-13.5 +/-2
--
R
--
-12 +/-2
--
-2 +/-2
--
-13.5 +/-2
Table 3.3-6 Input Terminal 2TR IN L,R [dBu]
!1
!2
INPUT
INPUT Level
CH1 PAN control
L
CH INSERT IN 1
-16
L (turned counterclockwise fully)
R
R (turned clockwise fully)
Table 3.4-1 [dBu]
ST L OUT
ST R OUT
L
+12 +/-3
--
R
--
+12 +/-3
Table 3.4-2 [dBu]
3.5
Frequency Characteristics
In the signal routes of the Table 3.3-1 to 3.3-6 indicated with
q
to
!2
, the 20Hz and 20kHz frequency response of
each output shall be within the range of 0dB +1/-2.5dB compared to the 1kHz (0dB).
* The 20Hz level when the GAIN volume is Max shall be within the range of 0dB +1.0/-4.5 dB compared to
the 1kHz (0dB).
* In the route
q
, check every OUT when the signal is fed to CH1, and check only the ST L OUT when the signal
is fed to CH2 and other channels.
* In the route
r
, check only the ST L OUT and the ST R OUT.
3.6
HPF
In the state of the Table 3.3-1 and 3.3-2, feeding 80 Hz -36dBu signal, and setting the GAIN to MIN, the STEREO
L OUT level obtained when the
switch is set to ON shall be within the range of -3 dB +2/-2dB compared to
the level obtained when the switch is set to OFF.
INPUT
INPUT Level
ST L OUT
ST R OUT
L/MONO
-8
+4 +/-2
+4 +/-2
R
--
+4 +/-2
Table 3.3-5 Input Terminal RETURN L,R [dBu]
o
!0
