Instrument and control functions
4-28
4
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
2. Install the cap.
3. Install the passenger seat.
TIP
•
Make sure that the seats are prop-
erly secured before riding.
•
The rider seat height can be ad-
justed. See the following section.
EAU92633
Adjusting the rider seat height
The rider seat height can be adjusted
to one of two positions.
To change to the high position
1. Remove the passenger seat and
rider seat.
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
1. Cap
2. Rider seat lock lever
1. Projection
2. Seat holder
2
11
11
22
1. Cap
11
1. Low position
2. High position
1
2
