SYNC-RECORDING
For synchronized operation with MIDI instruments, the
optional YMC10 MIDI converter enables synchro-
operation of the CMX1 and MIDI instruments such as
the RX11, RX15, and RX21 digital rhythm programmers
and the QX1 and QX7 digital sequence recorders. In
this section, we will explain synchro-recording using
synchro-operation techniques.
Merits of synchro-recording
Synchro-recording enables the use of digital sources
such as rhythm programmers and sequencers dur-
ing the first mixdown stages. Since these sources
are recorded directly onto the master, it extracts
the full sound quality, dynamic range, and superb
S/N performance of these digital instruments.
Operating the tape sync
In order to work the tape sync, the MIDI synchroniz-
ing signal must be converted to an FSK (frequency
shift keying) signal first. This is because MIDI
transmits information at an extremely high maximum
speed of 31.25 K baud per second.
Therefore, the use of analog instruments is impossi-
ble. By using the MIDI converter, the MIDI syn-
chronizing signal is converted to an FSK signal that
analog instruments can handle.
An example of synchro-recording using the
RX 15 rhythm programmer
Set the RX15 to create the desired rhythm
effects.
Connect the RX15 in the following manner.
After putting the MT1X into the REC PAUSE
mode, turn the SYNC switch “ON”. In this con-
dition, both the tape will start and the RX15 will
start playing when the PAUSE switch is pressed.
Here’s how it works. The YMC 10 converts the
MIDI synchronizing signal from the RX15 to FSK
signal, which is recorded on track 1 of the MT1X.
In order to operate the RX15 by the FSK signal
recorded on track 1, connect everything like this:
33
With the SYNC switch “ON”, press the PLAY
switch and the FSK signal recorded on track 1 is
sent to the YMC10, which converts it to the MIDI
synchronizing signal and outputs it to the RX15.
In this way, track 1 of the MT1X operates the
RX15. FOR THIS OPERATION, DON’T FORGET
TO SET THE RX15 SYNC SWITCH TO “MIDI”.
Now, tracks 2-4 can be used for overdubbing.
Connect as shown below for mixdown.
Start the tape, mixdown the sound from tracks
2—4 and the RX15’s drum sounds input through
the AUX Left and Right jacks, and record it with
a stereo tape deck.
Summary of Contents for MT1X
