Yamaha MT1X, Authorized Product Manual

Page: 17 / 42

ATTACHING THE STRAP
The MT1X can be easily carried with the supplied carrying strap. Here’s how to attach it.
Push on the slit to open the stopper, and hang it on
the peg.
Slide the strap to the desired position and lock the
stopper in place.
WHEN USING THE BATTERY PACK
With the optional PA11 Battery Pack, the MT1X can be operated by batteries in places where there is no AC outlet
available. Here’s how to set it up.
• PUTTING IN THE BATTERIES
Slide off the battery cover on the bottom of the bat-
tery pack.
Insert 10 “C” batteries as shown.
Put 7 on the bottom Then put 3 on top
Replace the battery cover.
15
• ATTACHING THE BATTERY PACK
Align the battery pack on the left side of the MT1X.
Slide it on, and tighten the battery pack mounting
screw with a coin or screwdriver. The battery pack
is now firmly attached.
NOTES:
When using the battery pack as a power supply, remove the AC
adaptor.
The battery pack can only supply power to the MT1X when it is
properly attached.
The MT1X was designed for indoor use. Avoid using it areas of high
heat or humidity, or in dusty places.
If the battery pack isn’t going to be used for an extended period
of time, remove the batteries inside.
Battery life: about 2 hours during 2 channel recording with a head-
phone output of 10mW + 10mW.