background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-20

6

CAUTION:

ECA11110

Do not use engine oil or any other lu-
bricants for the drive chain, as they
may contain substances that could
damage the O-rings.

EAU23100

Checking and lubricating the 
cables 

The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.

WARNING

EWA10720

Damage to the outer sheath may in-
terfere with proper cable operation
and will cause the inner cable to
rust. Replace a damaged cable as
soon as possible to prevent unsafe
conditions.

EAU23111

Checking and lubricating the 
throttle grip and cable 

The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specified in the periodic
maintenance chart.

Recommended lubricant:

Engine oil

U5YU23E0.book  Page 20  Friday, November 23, 2007  8:49 AM

Summary of Contents for MT01X





























































































Reviews: