Yamaha MT-25, Owner'S Manual

Page: 32 / 93

Instrument and control functions
4-14
4
EAUN0790
Fuel tank breather hose and
overflow hose
Before operating the motorcycle:
t Check each hose connection.
t Check each hose for cracks or
damage, and replace if necessary.
t
Make sure that the end of each
hose is not blocked, and clean if
necessary.
t
Make sure that the end of fuel tank
breather hose is positioned out-
side of the cowling.
EAU13434
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
WARNING
EWA10863
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
t Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
t Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.
t
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
1. Fuel tank overflow hose
2. Fuel tank breather hose
2 1
t
EAU62622
Seats
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it clockwise.
2. While holding the key in that posi-
tion, lift the rear of the passenger
seat and pull it backward.
To install the passenger seat
1. Insert the projections on the front
of the passenger seat into the seat
holders as shown, and then push
the rear of the seat down to lock it
in place.
1. Passenger seat lock
2. Unlock.
2
1