Instrument and control functions
4-8
4
“AVE_ _._ MPG”: The average dis-
tance that can be traveled on 1.0
US gal of fuel is shown.
t
To reset the display, push the
“RESET” button.
t
After resetting the "_ _._" is displayed
until the motorcycle is running a
certain distance.
TIP
Shift timing indicator light
The shift timing indicator light has four
settings which can be adjusted.
1. Shift timing indicator light
2. Brightness level display
2
1
MPH
t5
he shift timing indicator light
on/flash/off.
t5
he shift timing indicator light on.
t5
he shift timing indicator light off.
t5
he shift timing light brightness.
To set the rpm when the gear shift
indicator light is on
To adjust the shift timing indicator light
1. Turn off the motorcycle.
2. Push and hold the “SELECT” but-
ton.
3. Turn on the motorcycle, and then
release the “SELECT” button after
five seconds.
4. Push the “RESET” button to select
one of the following flashing pat-
tern settings:
t
On: the indicator light stays
on when activated. (This set-
ting is selected when the indi-
cator light stays on.)
t
Flash: the indicator light
flashes when activated. (This
setting is selected when the
indicator light flashes four
times per second.)
t
Off: the indicator light is deac-
tivated; in other words, it
does not come on or flash.
(This setting is selected when
the indicator light flashes
once every two seconds.)
5. Push the “SELECT” button to con-
firm the selected flashing pattern.
The shift timing indicator light
changes to the activation point
setting mode.
The shift timing indicator light de-
activation point can be set be-
tween 7000 r/min and 15000
r/min. From 7000 r/min to 12000
r/min, the indicator light can be set
in increments of 500 r/min. From
12000 r/min to 15000 r/min, the in-
dicator light can be set in incre-
ments of 200 r/min.
1. Push the “RESET” button to select
the desired engine speed for de-
activating the indicator light.
2. Push the “SELECT” button to con-
firm the selected engine speed.
The control mode changes to the
brightness setting mode.
Summary of Contents for MT-25
Page 93: ......
