Yamaha MT-25, Owner'S Manual

Page: 23 / 93

Instrument and control functions
4-6
4
Press the "SELECT" button to change
the display in the following order.
ODO
o
TRIP1
o
TRIP 2
o
TRIP F
o
km/L, L/100 km MPG
o
AVE_ _._
km/L, AVE_ _._ L/100 km or AVE_
_._MPG,
o
OIL TRIP
o
ODO
The multi-function display is equipped
with the following:
t odometer ODO
t
tripmeters TRIP 1 and TRIP 2
t
fuel reserve tripmeter TRIP F
t instantaneous fuel consumption
display (km/L, L100 km, or MPG)
t average fuel consumption display
(AVE_ _. _ km/L, AVE_ _. _L/100
km, or AVE_ _._MPG.
t
oil change tripmeter OIL TRIP
t oil change indicator
TIP
Fuel reserve tripmeter appears when
fuel is running low.
Odometer
The odometer shows the total distance
traveled by the vehicle.
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, use the left set
button to display the tripmeter you
want to reset, and then push “RESET”
button .
TIP
t
The tripmeters will lock at 9999.9
but can be manually reset.
Fuel reserve tripmeter
When the fuel level becomes low, the
last segment of the fuel meter will start
flashing. The fuel reserve tripmeter
“TRIP F” will automatically appear and
start counting the distance traveled
from that point.
To reset the fuel reserve tripmeter, push
the “RESET” button.
You can manually reset the fuel re-
serve tripmeter, or after refueling
and traveling 5 km (3 mi) it will re-
set automatically and disappear
from the display.
Tripmeter
TIP
t The odometers will lock at 999999
but can be manually reset.
TIP
Oil change tripmeter
The oil change tripmeter shows the
distance traveled since it was last reset
(i.e., since the last oil change).
The oil change indicator “OIL” will flash
at the initial 1000 km (600 mi), then at
4000 km (2500 mi) and every 5000 km
(3000 mi) thereafter to indicate that the
engine oil should be changed.
1. Oil change indicator “OIL”
2. Oil change tripmeter
1 2
MPH