2-24
INSP
ADJ
2
3
1
CAUTION:
There is a magnet attached to the end of the
dipstick. It is used to remove any metal particles
that may accumulate in the drive chain housing.
Be sure to:
•
Pull the dipstick out slowly and gently so the
metal particles do not fall off the magnet back
into the drive chain housing.
•
Wipe off the magnet before reinserting the
dipstick into the drive chain housing.
•
Remove the dipstick and check that the oil is
between the upper
a
and lower
b
levels. If
not, add oil to the upper level.
Å
For models without reverse transmissions
ı
For models with reverse transmissions
(not applicable)
Recommended oil:
Gear oil API “GL-3”
SAE #75 or #80
CAUTION:
Make sure that no foreign material enters the
gear case.
•
Reinsert the dipstick and fit the loop
2
of the
dipstick handle onto the projection
3
of the
gear case.
Oil replacement
Oil replacement steps:
•
Place the oil pan under the drain hole.
•
Remove the oil drain bolt
1
and drain the oil.
CAUTION:
Be sure to remove any oil from the heat protec-
tor.
DRIVE CHAIN
A
B
SEJ2500
SEJ2510
SEJ2520
SEJ2530
Summary of Contents for MM600D
