Yamaha MCX 1000 - MusicCAST - Digital Audio Server, Owner'S Manual

Page: 123 / 148

System setup
123
System setup
• Synchronize power ON/OFF with the MusicCAST
The AV receiver will turn on when you turn the MusicCAST
server on.
• Change surround program for each genre played.
The MusicCAST server will automatically change the
surround program on the AV receiver to suit the song it is
playing back.
To automatically change the surround settings on the AV
receiver, you first need to register surround information to the
songs recorded on the MusicCAST server (see page 91).
■
Tuner distribution setting
The MusicCAST server can distribute audio output from
your AV receiver tuner to MusicCAST clients. Each
MusicCAST client can select from the radio stations you
have set on the AV receiver (called “Tuner presets”). This
function does not work for units without a tuner.
Ensure that you set the ANALOG REC LEVEL control on
the front panel of the MusicCAST server to a level where
you can comfortably hear the tuner output.
Use the
/ to move the cursor to the option you wish to
select and press SELECT. To use the tuner in your AV
receiver with the MusicCAST server, connect the REC OUT
or ZONE 2 OUT jacks on the AV receiver to the ANALOG
IN jacks on the MusicCAST server.
• REC OUT
The AV receiver outputs the audio signal from its tuner
from its REC OUT jacks.The input setting on your AV
receiver changes to TUNER when you use a MusicCAST
clients to select or change a tuner preset.
• ZONE 2 OUT
The AV receiver outputs the audio signal from its ZONE 2
OUT jacks.The ZONE 2 INPUT setting on your AV
receiver changes to TUNER when you use a MusicCAST
client to select or changes a tuner preset.
• Off
The function is inactive.
4 When you finish setting the parameters
described in the previous step, move the cursor
to “OK” and press SELECT.
The display returns to the System Setup screen.
Select “Cancel” to return to the System Setup screen without
changing any settings.
HINT
HINT
Press BACK to return to the previous screen.