Yamaha MAJESTY YP250, Service Manual

Page: 74 / 267

3-24
COOLANT REPLACEMENT
INSP
ADJ
*****************************************************
CAUTION:
NOTE:
If coolant splashes in your eyes:
thoroughly wash your eyes with water
and consult a doctor.
If coolant splashes on your clothes:
quickly wash it away with water and then
with soap and water.
If coolant is swallowed:
quickly make the person who has swal-
lowed it vomit and then take him to a doc-
tor.
Hard water or salt water is harmful to en-
gine parts. Use only distilled water if soft
water is not available.
If you use tap water, make sure it is soft
water.
Do not use water containing impurities or
oil.
Take care that no coolant splashes onto
painted surfaces. If it does, wash them
straightaway with water.
Do not mix different types of ethylene gly-
col antifreeze containing corrosion inhib-
itors for aluminum engines.
9. Tighten:
Screw (carburetor bleed)
Fill the coolant slowly to the specified lev-
el.
10. Install:
Radiator cap
11. Start the engine and let it warm up for sev-
eral minutes.
12. Stop the engine and inspect the level.
Refer to “COOLANT LEVEL INSPECTION”
section.
Wait a few minutes until the coolant settles be-
fore inspecting the coolant level.
13. Install:
Fuel tank
Side panels
Refer to “COVER AND PANEL” section.