Yamaha MAJESTY YP125E Owner'S Manual Download

Page: 26 / 84

To close the seat

1. Fold the seat down, and then

push it down to lock it in place.

2. Remove the key.

TIP

Make sure that the seat is properly
secured before riding.

EAU14541

Storage compartment

To open the storage compartment

1. Open.
2. Front storage compartment lid

1. Insert the key into the lock, turn it

clockwise, and then pull on it to
open the storage compartment
lid.

To close the storage compartment

1. Push the storage compartment

lid into the original position, and
then remove the key.

EWA10961

WARNING

●

Do not exceed the load limit of
0.5 kg (1.10 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 177 kg (390 lb) for the
vehicle.

INSTRUMENT AND CONTROL FUNCTIONS

3-11

5D8-F8199-E1.QXD 10/7/08 07:39 Página 26

Summary of Contents for MAJESTY YP125E





















































































Search results

Summary of Contents for MAJESTY YP125E

Reviews:

Related manuals for MAJESTY YP125E

Brands by name

Popular brands

Yamaha MAJESTY YP125E, Owner'S Manual

Search results

Summary of Contents for MAJESTY YP125E

Reviews:

Related manuals for MAJESTY YP125E

Brands by name

Popular brands