background image

2. Insert the key in the lock and turn

it clockwise.

To close the fuel tank cap

1. Align the match marks, and then

push the fuel tank cap into the
original position.

2. Turn the key counterclockwise

and remove it.

3. Close the fuel tank cover.

EWA11091

s

s

WARNING

Make sure that the fuel tank cap is
properly closed after filling fuel.
Leaking fuel is a fire hazard.

EAU13221

Fuel

Make sure there is sufficient gasoline
in the tank.

EWA10881

s

s

WARNING

Gasoline and gasoline vapors are
extremely flammable. To avoid fires
and explosions and to reduce the
risk of injury when refueling, follow
these instructions.

1. Before refueling, turn off the engi-

ne and be sure that no one is sit-
ting on the vehicle. Never refuel
while smoking, or while in the
vicinity of sparks, open flames, or
other sources of ignition such as
the pilot lights of water heaters
and clothes dryers.

2. Do not overfill the fuel tank. When

refueling, be sure to insert the
pump nozzle into the fuel tank
filler hole. Stop filling when the
fuel reaches the bottom of the
filler tube. Because fuel expands
when it heats up, heat from the
engine or the sun can cause fuel
to spill out of the fuel tank.

1. Fuel tank filler tube
2. Fuel level

3. Wipe up any spilled fuel imme-

diately. 

NOTICE: 

Immediately

wipe off spilled fuel with a cle-
an, dry, soft cloth, since fuel
may deteriorate painted surfa-
ces or plastic parts. 

[ECA10071]

4. Be sure to securely close the fuel

tank cap.

EWA15151

s

s

WARNING

Gasoline is poisonous and can cau-
se injury or death. Handle gasoline
with care. Never siphon gasoline by
mouth. If you should swallow some
gasoline or inhale a lot of gasoline
vapor, or get some gasoline in your

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

5D8-F8199-E1.QXD  10/7/08 07:39  Página 23

Summary of Contents for MAJESTY YP125E





















































































Reviews: