Yamaha M7CL-32, Service Manual

Page: 205 / 375

205
M7CL-32/M7CL-48
Scene "SCENE___"
Input EQ "INEQ___"
Output EQ "OUTEQ___"
Dynamics "DYNA___"
GEQ "GEQ___"
Effect "EFFECT___"
MODULE NAME
"LibStr__" SCENE 1- 300 *5) tx/rx
INPUT EQ LIB 41- 199 *1) tx/rx
OUTPUT EQ LIB 4- 199 *2) *3) *4) tx/rx
Dynamics LIB 42- 199 *1) *2) *3) *4) *8) tx/rx
GEQ LIB 1- 199 *6) tx/rx
EFFECT LIB 58- 199 *7) tx/rx
"LibUnStr" SCENE 1- 300 0 tx
INPUT EQ LIB 41- 199 0 tx
OUTPUT EQ LIB 4- 199 0 tx
Dynamics LIB 42- 199 0 tx
GEQ LIB 1- 199 0 tx
EFFECT LIB 58- 199 0 tx
"LibRcl__" SCENE 0- 300 *5) tx/rx
INPUT EQ LIB 1- 199 *1) tx/rx
OUTPUT EQ LIB 1- 199 *2) *3) *4) tx/rx
Dynamics LIB 1- 199 *1) *2) *3) *4) *8) tx/rx
GEQ LIB 0- 199 *6) tx/rx
EFFECT LIB 1- 199 *7) tx/rx
"LibUnRcl" SCENE 0 *5) tx
INPUT EQ LIB 0 *1) tx
OUTPUT EQ LIB 0 *2) *3) *4) tx
Dynamics LIB 0 *1) *2) *3) *4) *8) tx
GEQ LIB 0 *6) tx
EFFECT LIB 0 *7) tx
"LibStrUd" SCENE 0 0
"LibRclUd" SCENE 0 0
Function Number channel*1) tx/rx
4.2 Function call - library store, recall -
4.2.1
Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the
Device number of both [Rx CH] and SUB STATUS are matched.
The data will be echoed when [Parameter change ECHO] is on.
The corresponding parameter will be changed immediately the data
is received.
Transmission
Data will be transmitted with the [Device Number] in [Tx CH] when
[Parameter change Tx] is on.
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E Digital mixer
MODEL ID 00010001 11 M7CL
DATA CATEGORY 00000000 00 OTHER DATA
FUNCTION NAME 01001100 “L” (ASCII CODE)
01101001 “ i ” (ASCII CODE)
01100010 “b” (ASCII CODE)
0 f f f f f f f f f (ASCII CODE)
0 f f f f f f f f f (ASCII CODE)
0 f f f f f f f f f (ASCII CODE)
0 f f f f f f f f f (ASCII CODE)
0 f f f f f f f f f (ASCII CODE)
MODULE NAME 0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
DATA 0mmmmmmm m h number High
0mmmmmmm m l number Low
0ccccccc ch channel High
0ccccccc c l channel Low
EOX 11110111 F7 End of exclusive
4.2.2 Function Name
4.2.3 Module Name
*1) 0:CH1 - 47:CH48
48:ST IN 1L - 55:ST IN 4R
*2) 256:MIX1 - 271:MIX16
*3) 512:MATRIX1 - 519:MATRIX8
*4) 1024:STEREO L - 1026:MONO(C)
*5) 512:will be used if the recalling or storing data is only one.
*6) 0:RACK1 - 7:RACK8 If a GEQ is mounted in RACK 1 - 8.
*7) 0:RACK5 - 3:RACK8 If an effect is mounted in RACK 5 - 8.
*8) 1280:CH 1 - 1327:CH 48
1328:STIN 1L - 1335:STIN 4R
(Dynamics2)
4.3 Function call - library edit -
4.3.1
Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the
Device number of both [Rx CH] and SUB STATUS are matched.
The data will be echoed when [Parameter change ECHO] is on.
The corresponding memory/library will be changed immediately
the data is received.
Transmission
Parameter Change Message will be sent in reply to Request. If
[Parameter change ECHO] is on, the message will be sent as it is.
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E Digital mixer
MODEL ID 00010001 11 M7CL
DATA CATEGORY 00000000 00 OTHER DATA
FUNCTION NAME 01001100 “L” (ASCII CODE)
01101001 “i” (ASCII CODE)
01100010 “b” (ASCII CODE)
Store "LibStr__"
Recall "LibRcl__"
Unknown Factor Store "LibUnStr"
Unknown Factor Recall "LibUnRcl"
Store Undo (only Scene) "LibStrUd"
Recall Undo (only Scene) "LibRclUd"
FUNCTION NAME