Yamaha M7CL-32, Service Manual

Page: 131 / 375

M7CL-32/M7CL-48
131
NG DSP6
NG: TxBusy! Can't continue
NG DSP6, SIO
NG DSP7
1: CPU Interface (Data bus) ---
NG! ICxxx(x) TxBusy Error
2: CPU Interface (Data bus) ---
NG: ICxxx(x) 0000 XXXX 0000 ---
A: SIO Connection
AutoNext OK!
A: SIO Connection
ok!
NG DSP7, SIO, ATSC2
AutoNext
OkData TxData
START PAUSE CLOSE
If the check result is NG
NG PLLP2
NG: MCS Wxx:yy--> Rxx:yy
:
:
NG Master Adres, Data BUS
AutoNext
OkData TxData
START PAUSE CLOSE
If the check result is NG
Display in case the check result is NG
NG: MCS Wxx:yy--> Rxx:yy
Register number which is not acceptable
Write Data Read Data
1-7 DSP6 test
1-8 DSP7 test
Contents: Checks the condition of Data BUS and Address BUS
by writing/reading the register of DSP6 and DSP7.
Compares and checks by writing/reading DRAM and
SDRAM of each DSP6 and DSP7 through the
register.
Checks the SIO connection between each DSP by
transmitting and receiving signals.
DSP6 test items and display provided during execution (in the right window)
1:
CPU Interface (Data bus) ... OK
2:
CPU Interface (Data bus) ... OK
3: CPU Interface (Chip Select, TXB) ... OK
4: CPU Interface (Address bus) ... OK
5:
CPU Interface (BUS W/R Reg.) ... OK
6:
DRAM Interface (Data Bus) ... OK
7: DRAM Interface (Address Bus) ... OK
8:
DRAM Interface (Address Bus & MPR)... OK
9:
SIO Connection ... OK
SIO test of DSP6
→
DSP6
A:
PIO Connection ...OK
SIO test of DSP6
→
DSP6
DSP7 test items and display provided during execution (in the right window)
1:
CPU Interface (Data Bus) ... OK
2: CPU Interface (Chip Select) ... OK
3:
CPU Interface (Address Bus) ... OK
4:
E-RAM Interface (Data Bus) ... OK
5: E-RAM Interface (Address Bus) ... OK
6:
SIO Connection (DSP7
→
DSP6) ... OK
7:
SIO Connection (DSP6
→
DSP7) ... OK
8: SIO Connection (DSP7
→
DSP7) ... OK
9:
SIO Connection (ATSC
→
DSP7) ... OK
A:
SIO Connection (DSP7
→
ATSC) ... OK
Common to DSP6 and DSP7, Explanation about display if the
check result is NG
1)
CPU Interface (Data Bus)
NG:ICxxx(1) 0000 0000 XXXX 0000 0000 0000 0000 X00X
MSB LSB
IC number DSP number X= Error bit
With display of 32/24/16/8 bit
2) SIO Connection (DSP7
→
DSP6) ...
NG: 1 ICxxx(1)[Soxx]
→
ICxxx(1)[Sixx]
1-6 PLLP2 test
Contents: Checks the condition of Data BUS and Address BUS
by writing/reading the register (00, 0f, 10, 16) of
PLLP2.
Checks A0...A4 and D0...D15.
Example of executing screen
OK E-Bus Host Controller
NG: E-BUS
OK E-Bus Address, Data BUS
AutoNext
OkData TxData
START PAUSE CLOSE
If the check result is NG
Display in case the check result is NG
NG: E-BUS
Displayed if access to E-BUS Host Controller is NG.
1-5 E-BUS HOST test
Contents: Checks the condition of Data BUS and Address BUS
by writing/reading the register of E-BUS Host
Controller.
Example of executing screen
Example of executing screen