[Parameter]
type
:
Interface type
Interface type
Description
port
Physical interface
vlan
VLAN interface
sa
Static logical interface
po
LACP logical interface
index
:
Index number
Interface ID
Description
S.X
Specifies the stack ID (S) of the physical
interface, and the number printed on the chassis
(X). * The SWR2311P is fixed as stack ID=1.
<1
-
4094>
Specify the VLAN ID.
<1
-
96>
Speciffy the static logical interface number.
<1
-
127>
Specify the LACP logical interface number.
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the status of the interface specified by
ifname
. If
ifname
is omitted, shows the status of all interfaces.
The following items are shown.
Item
Description
Interface
Interface name
Link is
Link status *2 (if shutdown, shows the
cause)
• If shutdown is specified : (by
shutdown)
• If port error is detected : (by err-
disable)
Hardware is
Interface type (e.g., Ethernet, VLAN)
HW addr
Physical (MAC) address *1
Description
Description of interface
ifIndex
Interface index number
MRU
Maximum Receive Unit *4
ARP ageing timeout
ARP timeout time (time that ARP
entries are maintained) *3
Speed-Duplex
Speed and duplex mode settings, and
operating status *1
Auto MDI/MDIX
Auto MDI/MDIX enabled/disabled *1
IPv4 address
IP address/mask length *3 (shown only
if IP address is set)
broadcast
IP broadcast address *3 (shown only if
IP address is set)
Switchport mode
Mode of the switchport
• access : untagged
Command Reference | Interface control |
117