manualshive.com logo in svg

Yamaha L2, Command Reference Manual

The Yamaha L2 Command Reference Manual is a comprehensive guide that provides detailed instructions and information about the product. This essential manual is available for free download on our website, manualshive.com, allowing users to access it easily and conveniently. Gain complete control and maximize the potential of your Yamaha L2 with this indispensable resource.

Share
Download
background image

SWR2311P#show vlan

2.5.3 Input command completion and keyword candidate list display

If you press the "Tab" key while entering a command in the console, the command name is completed. If you press the "Tab"
key after entering a keyword, a list of keyword candidates that can be entered next is shown. The same operation can also be
performed by pressing the "Ctrl + I" key.
• Command name completion

SWR2311P#con "press the <Tab>key"

      ↓

SWR2311P#configure

• Keyword candidate list display

SWR2311P(config)#vlan "press the <Tab> key"

access-map  database    filter

SWR2311P(config)#vlan

2.5.4 Entering command abbreviations

When you enter commands or parameters in abbreviated form, and the characters you entered can be recognized
unambiguously as a command or parameter, that command is executed.
Example of entering a command abbreviation (show running-config)

SWR2311P# sh run

2.5.5 Command history

By using the command history function, you can easily re-execute a command that you previously input, or partially modify a
previously input command and re-execute it. Command history is shown as a history that is common to all modes.
Operation is shown below.

Keyboard operation

Description and notes

↑

Move backward through command history

Ctrl + P

↓

Move forward through command history

Ctrl + N

2.6 Commands that start with the word "show"

2.6.1 Modifiers

Modifiers send the information produced by the 

show

 command through a filter, restricting the content that is shown in the

screen and making it easier for you to see the desired information.
The SWR2311P provides the following three modifiers for the 

show

 command.

Modifiers

Description

include

Output only the lines that include the specified character
string

grep

exclude

Output only the lines that do not include the specified
character string

Modifiers can be used only one at a time. You cannot specify more than one modifier.
• (Example) Using 

show running-config

 to view information that includes VLAN #1 (vlan1).

SWR2311P#show running-config | grep vlan1

interface vlan1

http-server interface vlan1

telnet-server interface vlan1

• (Example) Using 

show spanning-tree

 to view information that includes Role.

SWR2311P# show spanning-tree | include Role

%   po1: Port Number 505 - Ifindex 4601 - Port Id 0x81f9 - Role Disabled - State 

Command Reference | How to use the commands | 

21

Summary of Contents for L2











































































































































































































































































Reviews:

No comments

Related manuals for L2

IBM 8237 Installation And User Manual preview
8237
Brand: IBM Pages: 166
HPM XL770T Product Information preview
XL770T
Brand: HPM Pages: 4
Eaton SOL30 Series Instruction Leaflet preview
SOL30 Series
Brand: Eaton Pages: 4
SMART Hub VE220 Installation And User Manual preview
Hub VE220
Brand: SMART Pages: 46
Comtrend Corporation ES-7211PoE User Manual preview
ES-7211PoE
Brand: Comtrend Corporation Pages: 2
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Brand: Bridgetek Pages: 2
3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch Getting Started Manual preview
3CB9E7 - CoreBuilder 9000 Chassis Switch
Brand: 3Com Pages: 132
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
LINK-MI LM-MX42-AUDIO User Manual preview
LM-MX42-AUDIO
Brand: LINK-MI Pages: 12
Banner SI-HG63FQDR Instruction Manual preview
SI-HG63FQDR
Brand: Banner Pages: 8
Mastervolt Battery Switch Manual preview
Battery Switch
Brand: Mastervolt Pages: 2
W&T IP-Watcher 2x2 Digital PoE Manual preview
IP-Watcher 2x2 Digital PoE
Brand: W&T Pages: 79
Veris Industries Hawkeye 909 Installation Manual preview
Hawkeye 909
Brand: Veris Industries Pages: 2
Shinybow USA SB-5688CAP Instruction Manual preview
SB-5688CAP
Brand: Shinybow USA Pages: 32
Weidmüller IE-SW-EL10-8GTPoE-2GESFP Hardware Installation Manual preview
IE-SW-EL10-8GTPoE-2GESFP
Brand: Weidmüller Pages: 2
3Com SuperStack 3 3C17204 Getting Started Manual preview
SuperStack 3 3C17204
Brand: 3Com Pages: 100
Accton Technology ES3616 Management Manual preview
ES3616
Brand: Accton Technology Pages: 73
Dell Force10 TeraScale C Series Reference Manual preview
Force10 TeraScale C Series
Brand: Dell Pages: 1640

Brands by name

Popular brands

Load more brands