8
s
DECK B
DECK A
MUTE/SEARCH
SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection
When the
@
tape running indicator is lit:
To search for the next selection
When the
#
tape running indicator is lit:
⁄
!
MUTE/SEARCH
MUTE/SEARCH
Press
simultaneously.
Press
simultaneously.
+
+
When the
@
tape running indicator is lit:
To search for the beginning of the current selection
When the
#
tape running indicator is lit:
!
⁄
To search for the selection located before the current selection
÷
Operate the following buttons when the beginning of the current selection is being played.
MUTE/SEARCH
MUTE/SEARCH
Press
simultaneously.
Press
simultaneously.
+
+
When the
#
tape running indicator is lit:
When the
@
tape running indicator is lit:
!
⁄
MUTE/SEARCH
MUTE/SEARCH
Press
simultaneously.
Press
simultaneously.
+
+
Notes
÷
The blank interval between selections must be at least 4 seconds long.
÷
Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise.
÷
Use the tape counter to aid in locating a point on a tape (0000 to 9999). To set the counter reading to “0000”, press the
RESET button.
RESET
⁄
!
