7
DOLBY NR selector setting (in step 4)
Be sure to set the DOLBY NR selector according to the
system used for recording.
OFF
: For a tape recorded with DOLBY NR OFF.
B
: For a tape recorded with DOLBY B NR.
C
: For a tape recorded with DOLBY C NR.
* Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
REVERSE MODE selector setting (in step 5)
The auto reverse function allows the tape running direction
to be reversed automatically. Select an auto reverse mode
(
”
), manual reverse mode (
“
) or RELAY playback mode.
“
: When playback or fast forwarding (or rewinding) of one
side of a tape is finished, the deck stops at the end of
the tape.
”
: Both sides of the tape are repeatedly played back (up
to 8 times).
÷
When the tape is fast forwarded to the end of a side,
playback automatically starts from the other side.
When the tape is rewound to the beginning of a side,
playback automatically starts from the beginning.
RELAY:
Cassette tapes loaded in DECKs A and B are
played back sequentially. (See “RELAY PLAYBACK”
on page 9.)
¤
30
–
A
DUB NORM HIGH
‹
REC
R
dB
L
20
15
10
8
6
4
2
0
2
4
6
+
HALL
¤
B
‹
REC
DISCO CHURCH
JAZZ CLUB
SYNCHRO
Tape running direction
indicator (DECK A)
Tape running direction
indicator (DECK B)
Tape counter
Tape counter
DSS PRESET
PROGRAM indicators
Peak level meters
Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB
range. There are separate meters for each left and right channel. These level meters have a
peak hold function which holds the peak level for about 1.5 seconds.
KX-W582
To adjust the volume level
Use the volume control of the amplifier or receiver.
To use headphones
Insert the headphones plug into the PHONES jack. Since
the sound is also heard from the speakers, operate the
amplifier to cut off the sound from the speakers for private
listening.
Note
Never press the EJECT button during playback.
KX-W482
¤
30
–
A
DUB NORM HIGH
‹
REC
R
dB
L
20
15
10
8
6
4
2
0
2
4
6
+
¤
B
‹
REC
SYNCHRO
Tape running direction
indicator (DECK A)
Tape running direction
indicator (DECK B)
Tape counter
Tape counter
Peak level meters
Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB
range. There are separate meters for each left and right channel. These level meters have a
peak hold function which holds the peak level for about 1.5 seconds.
Display during playback
