manualshive.com logo in svg

Yamaha KODIAK 4X4 Ultramatic, Owner'S Manual

Share
Download
Yamaha KODIAK 4X4 Ultramatic Owner'S Manual Download Page 92

7-24

CLIMBING UPHILL 

Use proper riding techniques to avoid vehicle
overturns on hills. Be sure that you can ma-
neuver your ATV well on flat ground before at-
tempting any incline and then practice riding
first on gentle slopes. Try more difficult climbs
only after you have developed your skill. In all
cases avoid inclines with slippery or loose sur-
faces, or obstacles that might cause you to
lose control.

It is important when climbing a hill to make
sure that your weight is transferred forward on
the ATV. This can be accomplished by lean-
ing forward and, on steeper inclines, standing
on the footboards and leaning forward over
the handlebars.

WARNING

POTENTIAL HAZARD 
Operating on excessively steep hills. 
WHAT CAN HAPPEN 
The vehicle can overturn more easily on
extremely steep hills than on level sur-
faces or small hills. 

HOW TO AVOID THE HAZARD 
Never operate the ATV on hills too steep
for the ATV or for your abilities. Practice
on smaller hills before attempting large
hills.

EE.book  Page 24  Monday, June 18, 2001  10:05 AM

Summary of Contents for KODIAK 4X4 Ultramatic


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands