manualshive.com logo in svg

Yamaha KODIAK 4X4 Ultramatic, Owner'S Manual

Share
Download
Yamaha KODIAK 4X4 Ultramatic Owner'S Manual Download Page 135

8-26

1. Spark plug wrench

Inspection

The spark plug is an important engine compo-
nent and is easy to inspect. The condition of
the spark plug can indicate the condition of
the engine.
The ideal color on the white insulator around
the center electrode is a medium-to-light tan
color for a ATV that is being ridden normally.
Do not attempt to diagnose such problems
yourself. Instead, take the ATV to a Yamaha
dealer. You should periodically remove and
inspect the spark plug because heat and de-

posits will cause the spark plug to slowly
break down and erode. If electrode erosion
becomes excessive, or if carbon and other
deposits are excessive, you should replace
the spark plug with the specified plug.

Installation

1. Measure the electrode gap with a wire

thickness gauge and, if necessary, adjust
the gap to specification.

Specified spark plug:

DR8EA (NGK)

Spark plug gap:

0.6 ~ 0.7 mm (0.02 ~ 0.03 in)

EE.book  Page 26  Monday, June 18, 2001  10:05 AM

Summary of Contents for KODIAK 4X4 Ultramatic


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands