manualshive.com logo in svg

Yamaha KODIAK 4X4 Ultramatic, Owner'S Manual

Share
Download
Yamaha KODIAK 4X4 Ultramatic Owner'S Manual Download Page 141

8-32

EBU00522

Spark arrester cleaning

Select a well-ventilated area free of combusti-
ble materials and make sure the exhaust and
muffler are cool.

1. Remove the bolt.
2. Remove the tailpipe by pulling it out of

the muffler.

1. Bolt

2. Tailpipe

3. Purging bolt

3. Tap the tailpipe lightly, then use a wire

brush to remove any carbon deposits
from the spark arrester portion of the
tailpipe.

1. Spark arrester

4. Insert the tailpipe into the muffler and

align the bolt holes.

5. Install the bolt and tighten it.
6. Remove the purging bolt.
7. Start the engine and rev it up approxi-

mately twenty times while momentarily
creating exhaust system back pressure
by blocking the end of the muffler with a
shop towel.

8. Stop the engine and allow the exhaust

pipe to cool.

9. Install the purging bolt and tighten it.

EE.book  Page 32  Monday, June 18, 2001  10:05 AM

Summary of Contents for KODIAK 4X4 Ultramatic


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands