manualshive.com logo in svg

Yamaha KODIAK 4X4 Ultramatic, Owner'S Manual

Share
Download
Yamaha KODIAK 4X4 Ultramatic Owner'S Manual Download Page 32

4-10

EBU00066

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is
pushed to the maximum. Screwing in the ad-
juster limits the maximum engine power avail-
able and decreases the maximum speed of
the ATV.

1. Locknut

2. Adjusting bolt

WARNING

POTENTIAL HAZARD

Improper adjustment of the speed limit-
er and throttle.

WHAT CAN HAPPEN

The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an acci-
dent or be injured.

HOW TO AVOID THE HAZARD

Do not turn the speed adjuster out more
than 12 mm (0.47 in). Always make sure
the throttle lever free play is adjusted to
3 ~ 5 mm (0.11 ~ 0.20 in). See page 8-35.

EE.book  Page 10  Monday, June 18, 2001  10:05 AM

Summary of Contents for KODIAK 4X4 Ultramatic


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands