7
•
The following tools are required.
(Those items which are not underlined
are identical to those of the
.)
1
Closed wrench (12-14) (14-17) (22-24)
2
Torque wrench, socket (12 deep) (17 deep)
(24) (5mm hexagon)
3
Hexagon wrench (2) (4) (5)
4
Monkey wrench
5
Driver (plus, medium size)
6
Driver (minus, small size with long shaft)
7
Nipper (one blade)
8
Measurer
9
Vernier calipers
0
Thread lock
A
Grease
Installation: Preparation
Tools Required/Installation Based on
Wheelchair Type
Tire Size (inch)
24
22
24
22
24
22
24
22
Frame Type
Standard type
Sports Type
Offset Axle Type
Module Type
• At delivery, this is set to the standard type.
Battery
Bracket Angle
E
F
F
F
Length of the
Main switch
Extended
Standard setting
Extended
Standard setting
Extended
Standard setting
Extended
Standard setting
Angle of the
Main switch
3
8
3
3
Position of the
Clamp Bracket
Front
Rear
Front
Rear
Position of the
Stopper
Left
Right
2
5
Left
Right
2
6
Left
Right
2
6
Left
Right
2
6
•
Preparation for installation
NOTE:
Before installing, change the mounting position of the parts to match the wheelchair type, following the
chart below. The chart may not conform to some wheelchairs.
Frame Type
Standard Type
Back pipe and axle mounting portion pipe are in a
straight line.
Offset Axle Type
Angle difference between the back pipe and axle
mounting portion pipe is small.
Sports Type
Angle difference between the back pipe and axle
mounting portion pipe is large.
Module Type
Angle difference is large, as in the sports type.