Yamaha Jupiter Fi T115FS-5 Owner'S Manual Download

Page: 61 / 82

Perio

ic maintenance an

justment

7-26

EAUM1653

ricatin

the swin

arm piv-

ots

The swingarm pivots must be lubricat-
ed by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU23273

Checkin

the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.

To check the con

ition

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion.

WARNING! To avoi

injury,

securely support the vehicle so
there is no

er of it fallin

over.

[EWA10752]

2. While applying the front brake,

push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.

Recommen

ricant:

Lithium-soap-based grease

Recommen

ricant:

Lithium-soap-based grease

UBW7E0E0.book Page 26 Tuesday, February 9, 2016 11:48 AM

Summary of Contents for Jupiter Fi T115FS-5



















































































Search results

Summary of Contents for Jupiter Fi T115FS-5

Reviews:

Related manuals for Jupiter Fi T115FS-5

Brands by name

Popular brands

Yamaha Jupiter Fi T115FS-5, Owner'S Manual

Search results

Summary of Contents for Jupiter Fi T115FS-5

Reviews:

Related manuals for Jupiter Fi T115FS-5

Brands by name

Popular brands